home *** CD-ROM | disk | FTP | other *** search
- Path: hp63.rbg.informatik.th-darmstadt.de!niels
- From: niels@rbg.informatik.th-darmstadt.de (Niels Knoop)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: A3000 AGA and Amber question
- Date: 23 Feb 1996 00:39:11 GMT
- Organization: Technische Hochschule Darmstadt
- Message-ID: <4gj2bf$14av@rs18.hrz.th-darmstadt.de>
- References: <KUNISAWA.96Feb15125844@tje5.is.s.u-tokyo.ac.jp> <xJi$yMD42DaizC@j-plewka.amtrash.comlink.de>
- NNTP-Posting-Host: hp63.rbg.informatik.th-darmstadt.de
- X-Newsreader: TIN [version 1.2 PL2]
-
- Joern Plewka (J_Plewka@Amtrash.comlink.de) wrote:
-
- > > I'd like to have the Swedish A3000 AGA board. However, I wonder
- > > what will happen if I switch VGA mode enabled. Will AGA graphics
- > > mode properly deinterlaced?
- >
- > I don`t think it will work properly for HAM8 (limited to 4096)...but it
- > will for all other modes
-
- Of course it will reduce the palette in these modes from 2^24 to 2^12
- colors, which would be more or less visible even in modes with 256 or
- less colors depending on their palette.
-
- > except super72 or euro72, which fails on every flifi...
-
- The display enhancer will not really fail on those but pass them through -
- but which monitors will be able to display them?
-
- > and worse for SuperPal/NTSC.
-
- Do you think of the SuperHires screenmodes? Well, who cares about them?
-
- --
- | Ciao! /// Niels Knoop /// e-mail:
- niels@rbg.informatik.th-darmstadt.de |
- --
-